MUP [Case Solved]

Support for the Solar Eclipse Maestro photography software.

MUP [Case Solved]

Postby doakley » Fri Aug 11, 2017 1:59 am

A couple of simple questions on mirror lock up.

1. I'm using a Nikon D4. During the partial eclipse phase I had the MUP enabled for each photo. 30 seconds before total eclipse I am using LVPSTART so that I don't have to include MUP on each photo and loose a little time. On my Nikon it seems the Exposure Delay Mode is enabled during the partial eclipse for taking the photos. That messes up my LVPSTART because the camera is still set at a Exposure Delay Mode therefore making my burst photos slower than it should be. Is there a command to set the Exposure Delay Mode to 0 before I enable LVPStart?

2. After I turned off MUP on the pictures before I enabled LVPSTART, the camera worked fine. During the Total Eclipse, I am using TKBST around C2, then I switch to the TAKEPIC command for a series of pictures for the corona. Then around C3 I revert to TAKEBST. The take burst photos seem to do fine. However when I take individual pictures it sounds like the mirror is going up on each picture. Since those are slower shutter speeds I'm worried about the mirror going up on each picture. I turned LVPSTART on at C2-30 and turn it off at C3+30. Is my hearing off or do I need a command for the TAKEPiC series of pictures.
doakley
 
Posts: 4
Joined: Fri Jul 28, 2017 8:13 pm
Location: Asheville, NC, USA

Re: MUP

Postby xjubier » Sat Aug 12, 2017 4:13 am

First make sure that in the General Preferences the 'DSLR auto-locking controls when running a script' is activated, second set the drive/acquisition mode to S (SEM will take care of changing it when necessary).
Then something like this, I just typed it.
Partial stages with MLU (adjust the shutter speed for your setup):
FOR,(VAR),0,2.0,99.9
TAKEPIC,MAGPRE (VAR) ,+,00:00.0,D500,1/125,8.0,400,1.0,RAW,None,Y, Partial C2-
TAKEPIC,MAGPRE (VAR) ,+,00:05.0,D500,1/250,8.0,400,1.0,RAW,None,Y, Partial C2-
TAKEPIC,MAGPRE (VAR) ,+,00:10.0,D500,1/500,8.0,500,1.0,RAW,None,Y, Partial C2-
TAKEPIC,MAGPOST (VAR),+,00:00.0,D500,1/125,8.0,400,1.0,RAW,None,Y, Partial C3+
TAKEPIC,MAGPOST (VAR),+,00:05.0,D500,1/250,8.0,400,1.0,RAW,None,Y, Partial C3+
TAKEPIC,MAGPOST (VAR),+,00:10.0,D500,1/500,8.0,400,1.0,RAW,None,Y, Partial C3+
ENDFOR

Totality
CHGCSSL,C2,-,00:30.0,D500, , ,5, , , , ,Burst at 5 fps
LVPSTART,C2,-,00:15.0,D500, , , , , , , ,Start photography in Live View
TAKEBST,C2,-,00:4.0,D500,1/1000,7.1,100,30,RAW,None,N,Burst
RAMPUP,C2,+,00:06.0,D500,1/1000,7.1,100,0.0,RAW,None,Y,13,1.0,Ramping up
TAKEPIC,MAX,-,00:02.0,D500,4,7.1,400,1.0,RAW,None,N,Comment
RAMPDN,MAX,+,00:04.0,D500,4,7.1,100,0.0,RAW,None,Y,13,1.0,Ramping down
TAKEBST,C3,-,00:1.0,D500,1/1000,7.1,100,30,RAW,None,N,Burst
LVPSTOP,C3,+,00:20.0,D500, , , , , , , , Stop photography in Live View
xjubier
Site Admin
 
Posts: 326
Joined: Wed Oct 01, 2008 12:35 pm
Location: France

Re: MUP

Postby doakley » Sun Aug 13, 2017 7:18 pm

Thank you.
doakley
 
Posts: 4
Joined: Fri Jul 28, 2017 8:13 pm
Location: Asheville, NC, USA


Return to Solar Eclipse Maestro

Who is online

Users browsing this forum: No registered users and 3 guests

cron